The Forklift Battery 80V 600Ah is a 83.2-volt LiFePO4 traction pack of 49,920 watt-hours with a 500-amp continuous rating, rated IP54, supplied in a weighted box matched to the truck data plate. It powers 6 to 10 tonne trucks and port handling equipment.
Port Duty
Continuous heavy cycling
Container handling runs the same lift-travel-lower cycle for hours without a pause. 49,920 watt-hours carry a shift of that, and the 500-amp continuous rating holds through the sustained current a heavy mast draws. The management board tracks each cell rather than a group average.
Availability
What downtime costs at this size
A 10-tonne truck out of service stops a berth or a loading line, not one aisle. Charging in place on the breaks keeps the truck available, and the pack reports its own condition ahead of a failure rather than after it.
Charging
Terminal charging infrastructure
A pack of 50 kilowatt-hours needs a charger and a supply sized to match. At 500 amps the return takes about two hours; at 250 it takes four. Terminals usually run high-current chargers at fixed bays and route trucks through them on a schedule rather than plugging in anywhere.
Data
Datasheet
| Model | FL80-600 |
|---|---|
| Nominal voltage | 83.2V |
| Capacity | 600Ah |
| Energy | 49920Wh |
| Charge voltage | 94.6V |
| Continuous discharge | 500A |
| Peak discharge | 1000A (5s) |
| Cycle life | ≥4,000 cycles @80% DOD |
| Weight with ballast | 1000-1500 kg |
| Housing | Weighted box to truck plate |
| Operating temperature | Discharge -20~60°C / Charge 0~45°C |
| Protection rating | IP54 |
| Certification | UN38.3 / CE / UL2580 optional |
Fit
Ordering for port handling
Send the machine make and model, the compartment dimensions and the plated weight, and state the duty cycle the terminal runs. Continuous heavy cycling changes the cooling and the charger recommendation even when the pack size stays the same.
Reviews
There are no reviews yet.