The Boom Lift Battery 48V 160Ah is a 51.2-volt LiFePO4 pack of 8,192 watt-hours with a 250-amp continuous rating, rated IP67. It powers 20-metre boom lifts and rough-terrain machines.
Long Booms
Eight kilowatt-hours for a big machine
A 20-metre boom carries more mass to lift and drives further between set-ups. 8,192 watt-hours cover that day without the machine coming down for a charge, and the 500-amp peak handles the boom and the drive working together.
Site Economics
A machine that stays up
A hire machine pays while it is on site and working. Removing the mid-day charge and the acid maintenance from the routine puts hours back into the rental, and the 3,500-cycle life spans several seasons of hire.
Weight
Sixty-six kilograms on a long boom
A long-boom machine is the stability-critical extreme of this range. The tray is built to the machine plate so the load chart at full extension stays valid, and the pack is positioned to the manufacturer geometry rather than wherever it fits.
Data
Datasheet
| Model | AW48-160 |
|---|---|
| Nominal voltage | 51.2V |
| Capacity | 160Ah |
| Energy | 8192Wh |
| Charge voltage | 58.4V |
| Continuous discharge | 250A |
| Peak discharge | 500A (5s) |
| Cycle life | ≥3,500 cycles @80% DOD |
| Weight | ≈66 kg |
| Housing | Machine-specific tray |
| Operating temperature | Discharge -20~60°C / Charge 0~45°C |
| Protection rating | IP67 |
| Certification | UN38.3 / CE |
Fit
Ordering and charging
Send the machine make, model, serial range and the compartment drawing. Charge at 58.4 volts from an industrial lithium charger of 30 amps or more so a hire machine turns overnight between jobs.
Reviews
There are no reviews yet.