The Floor Scrubber Battery 24V 60Ah is a 25.6-volt LiFePO4 pack of 1,536 watt-hours with a 60-amp continuous rating, rated IP54, dimensioned to drop into the lead battery compartment. It powers walk-behind scrubbers and dust mops.
Walk-Behind Duty
1,536 watt-hours of cleaning
A walk-behind scrubber draws 30 to 60 amps with the brush deck down and the vacuum running. The pack covers two to three hours of continuous scrubbing, enough for a supermarket floor or a school corridor in one pass.
Maintenance-Free
No watering in a wet room
Lead cells in a cleaning machine sit in the wettest environment in the building and still need topping with distilled water. This pack is sealed, and the cleaner spends the time on the floor rather than on the battery.
Weight
Thirteen kilograms in a walk-behind
A walk-behind scrubber is pushed by an operator for hours. Taking 25 kilograms of lead out of the chassis makes the machine easier to turn at the end of an aisle and easier to lift over a threshold, and the saved energy goes into runtime.
Data
Datasheet
| Model | CL24-60 |
|---|---|
| Nominal voltage | 25.6V |
| Capacity | 60Ah |
| Energy | 1536Wh |
| Charge voltage | 29.2V |
| Continuous discharge | 60A |
| Peak discharge | 120A (5s) |
| Cycle life | ≥3,000 cycles @80% DOD |
| Weight | ≈13 kg |
| Housing | Lead compartment fit |
| Operating temperature | Discharge -10~60°C / Charge 0~45°C |
| Protection rating | IP54 |
| Certification | UN38.3 / CE |
Fit
Ordering and charging
The pack drops into the lead compartment. Charge at 29.2 volts from an industrial lithium charger, or from the on-board charger once it is set to an LFP profile. A lead charger left in place will not fill the pack correctly.
Reviews
There are no reviews yet.