72V 35Ah E-Moto Battery

The 72V 35Ah E-Moto Battery is a 72-volt LiFePO4 pack of 2,576 watt-hours with a 70-amp continuous rating, a CAN bus and tamper protection, rated IP65. It is specified for fleet and patrol machines.

CAN Bus

The pack on the vehicle network

The CAN interface puts state of charge, cell voltages, current and temperature on the vehicle bus. A dashboard reads a true percentage instead of estimating from voltage, and a fleet telematics unit logs the same data remotely. A pack drifting out of balance shows up in the log before it strands a rider.

Tamper Protection

Theft and unauthorised opening

Battery packs are the part of a light electric vehicle thieves take first. The case carries tamper detection that flags an opening attempt through the CAN log, and the pack locks out electrically when it is removed from its registered vehicle. A stolen pack becomes difficult to resell.

Patrol Loads

Standing current and pursuit current

A patrol machine alternates long standing periods on lights and radio with short high-current runs. The 70-amp continuous rating covers a 3,000-watt motor at full pull, and 2,576 watt-hours carry both the standing draw and the riding across a full shift.

Records

Data a fleet keeps

The CAN log records cycle count, the depth of each discharge, peak currents and temperature history. That record settles a warranty question without guesswork, and it shows an operator which machines are being worked hardest. Pull the log at each service rather than after a failure.

Data

Datasheet

Fit

Charging

Charge at 82.8 volts from a 72-volt lithium charger. On a CAN-equipped vehicle the charger and the pack coordinate the charge through the bus.