Ultra-high capacity 80V LiFePO4 battery for Class I heavy forklifts and port equipment. IP67 rated for outdoor, wet, and dusty environments.
The FL-80 Series is built for the most demanding material handling environments. From bustling port terminals to lumber yards exposed to the elements, this battery delivers consistent power where others fail.
Featuring an IP67 ingress protection rating, the FL-80 is completely sealed against dust and water immersion. This eliminates the need for expensive battery storage rooms and allows for outdoor charging capabilities.
With energy storage capabilities up to 80kWh, the FL-80 effectively replaces diesel-powered Class I forklifts, bringing zero-emission operations to heavy industry without sacrificing torque or runtime.
Fully sealed casing withstands rain, snow, and dust. Operate safely in outdoor yards and wash-down bays.
Delivers up to 600A continuous discharge. Handles 5-ton to 10-ton lifts with ease, even on ramps.
Optional built-in heating elements allow for safe charging and operation in freezing temperatures down to -30°C.
| Model | FL-80-600 / FL-80-800 / FL-80-1000 |
| Nominal Voltage | 76.8 V / 80 V |
| Rated Capacity | 600 Ah / 800 Ah / 1000 Ah |
| Energy Storage | 46 kWh / 61 kWh / 76 kWh |
| Chemistry | LiFePO4 (Lithium Iron Phosphate) |
| Continuous Discharge | 0.5C (300A - 500A Standard) |
| Peak Discharge (10s) | 1.2C - 1.5C |
| Charge Method | CC/CV with CANbus / RS485 |
| Recommended Charger | 0.5C Lithium Charger (300A - 500A) |
| Operating Temp (Charge) | 0°C to 55°C (with Heater: -20°C to 55°C) |
| Operating Temp (Discharge) | -30°C to 65°C |
| Ingress Protection | IP67 (Dust Tight & Immersion Proof) |
| Weight | ~650kg - ~950kg (Approx. 60% lighter than Lead-Acid) |
| Warranty | 5 Years / 20,000 Hours |
Designed for container handlers and reach stackers exposed to salt spray and heavy loads.
Ideal for outdoor lumber yards and brick plants where durability and weather resistance are mandatory.
Powers 8-10 ton forklifts in steel mills and heavy manufacturing facilities with zero emissions.
Our engineering team provides custom sizing and integration for heavy-duty equipment. Contact us for a feasibility study.
Contact Engineering Team